Summer Starts Here - Save up to 70%
Pacer Performance Hi-Five Truck Cab Light Kit Installation - 2012 Ford F-150- Video
Today in our 2012 Ford F-150, we're gonna be installing Pacer's Performance High Five truck cab lights. You can get these with incandescent bulbs using part number PP20-225, or with LED bulbs with part number PP20-226.These lights are designed to look like factory 1980 to 1998 cab lights for Ford vehicles. These lights will add a unique look to your vehicle, so if you're looking to stylize it to your taste, you can get that look you're looking for.LEDs typically last longer than your typical incandescent bulb, as they don't have any filaments that can be broken or overloaded. They're easy to use, you can either wire it up to your factory parking lights or you could use the included switch to have the option to turn it on and off whenever you'd like, even when your vehicle is sitting stationary with the key off.The light dimensions are five and a half inches long, three and a half inches wide and one and a half inches tall. On the bottom of each light, is a rubber foam seal that will help conform to your roof and keep out any moisture from entering the cab.To begin our installation, we're gonna start by drilling the holes for our lights. You can use the lights as a template. more
1/11/2019 9:43:08 AM
Luma LEDs 48 Diode LED Bulbs Installation - 2011 Ford Fusion- Video
Speaker 1: Today on our 2011 Ford Fusion we're going to be installing the Luma LED bulbs, size 3157. These come in a 42 diode brightness. You can also get them with 48 diodes and colors of amber, red and cool white. The 3157 LED bulb we have installed here, is the amber colored 42 diode.The 48 diode kit is going to produce 380 lumens of light, while the 42 diode kit is going to produce 540 lumens of light, so it's going to be a bit brighter. Here you can see on our passenger side, we've got our factory bulb and on our driver's side we've got our LED replacement. It's going to give you a brighter, cleaner look.And this is what our factory bulb looks like, illuminated out of the socket and this what our replacement LED bulb will look like. more
4/16/2018 12:29:01 PM
Luma LED Replacement Bulbs Installation - 2011 Ford Fusion- Video
Speaker 1: Today on our 2011 Ford Fusion, we're going to be installing Luma LED bulbs, size 194. These bulbs are also available in red, and amber color, as well as the cool white we're showing today. These LED bulbs are a factory or replacement upgrade that produces 126 lumens per bulb. LED bulbs typically have a longer lifespan than halogen bulbs, with these bulbs rated at about 50,000 hours.While you're on the passenger side of our vehicle, we still have the original 194 factory bulb. On our driver's side, we've replaced it with the LED Luma bulb. You can see how much brighter it is. more
3/12/2018 3:00:23 PM
Luma G6 Series LED Headlight Bulbs Installation - 2011 Ford Fusion- Video
Speaker 1: Today in our 2011 Ford Fusion, we're going to be installing LUMA G6 LED headlight bulbs, part number HL-H11C-2G6. As you see here, we've got our LUMA G6 bulbs on the left, and our stock halogen bulb on the right. The left bulb expands much further and is much clearer than our regular bulb. It also produces a natural white light and makes it easier to see things on the road versus your yellow dull factory bulb. These bulbs put out 6,000 lumens worth of light, and have 120 degree viewing angle, so you're going to get a much wider and clearer field of view compared to your factory bulbs.Also included in the kit is a film that can be wrapped around your bulb before installation. This will give it a cooler or a warmer color hue. more
3/12/2018 6:27:11 AM
Luma 3030 Series LED Fog Light Bulb Installation - 2011 Ford Fusion- Video
Speaker 1: Today on our 2011 Ford Fusion, we're gonna be installing the Luma 3030 LED fog light bulbs part number FLH112-3030-CW. These LED fog lamp bulbs are gonna work as a replacement for your factory bulbs. They produce about 950 lumens of light and have a nice, cool white color. LED bulbs typically have a longer life span than halogen bulbs. These bulbs last about 50,000 hours and this is what our original bulb looks like outside of the socket and here's what our new bulb looks like installed outside the socket.Now, let's show you how to get it installed. We're gonna begin our installation on the passenger side, we'll have to remove the underside panel. more
3/8/2018 12:07:35 PM
Optronics Opti-Brite Replacement Headlamp Installation - 1976 Ford F-250- Video
Speaker 1: Today on our 1976 Ford F250 we're going to be taking a look at showing you how to install the 7" Optronics replacement headlamp for optibright sealed beam to LED conversion kit, part number HLL93HLB.Also, available in a pack of two with part number HLL93HLB-2.This is what our lights are going to look like when they're installed. What these are going to do is they're going to replace your old worn out lights with a more high quality, efficient light.These lights are going to offer read facing LEDs and a metallic, parabolic reflector, which create a broad smooth beam.These lights are going to be a seven inch. They are goin to offer a 30,000 hour life span. They have a high and low beam built in. These are going to have a durable surface mount technology construction of LED circuit board, which better withstands shock and vibration and allows for improved heat distribution.There are going to work with 12 and 24 volt DC systems. Dicast aluminum housing, which is rust proof. more
1/25/2018 3:59:16 PM
Putco PURE Premium LED Dome Light Kit Installation - 2013 Ford F-250- Video
Today on our 2013 Ford F250 we'll be test fitting the Putco Pure Premium LED Dome Light Kit for the front and for the rear, part number P980279. These lights are 18 times brighter than traditional bulbs. They have a long life, more than 50,000 hours, and these lights have a super-low voltage consumption which saves power. We'll begin our test fit here up in the front of the vehicle, and using a screwdriver we'll remove the plastic cover for the front two set of lights. Now this is a delicate process so being careful not to put too much pressure, as you can break the plastic tabs which keep the cover in place. Once we have the cover off you can see that there's an aluminum covering which is used to project the light downward. We can pull that foil back and simply pull out the bulb. We'll then need to push the aluminum cover back up into place to be able to install our new Putco lights. more
9/2/2014 9:45:09 AM
Pilot LED Pickup Truck 3rd Brake Light Installation - 2003 Ford F-250- Video
Today on this 2003 Ford F-250 Super Duty we're going to install part number TB-202. This is the LED pickup truck third brake light with integrated cargo light. To start off our install, we need to go ahead and remove the original light on the truck. Let's go ahead and remove two screws until we pull the light way. Then we'll go ahead and pull off the electrical harness. Now there's a small tab that we have to lift up so I can pull apart the connection point. more
10/29/2013 3:35:49 PM
Tailgate Light Strip Installation- Video
Today on this 2008 Ford F-150 we will be showing you how to install the Bully LED tailgate fire strip part number TLB-001. The tailgate fire strip installs at the back of the bed in between the tailgate and the bumper. The fire strip installs to that area using a double sided adhesive tape so we will need to clean that area out before we can install it. For video purposes I am actually going to remove the tailgate. That will make it a lot easier. With the tailgate removed we can test fit the fire strip. The kit comes preassembled with the two longer pieces together which for some vehicles will be enough. There is a 24 inch extension piece that can go directly in the middle for vehicles that are a little bit wider. Just give it a test fit to see if you are going to need that extension piece or not. 00:44 more
3/8/2010 3:11:46 PM
Filter Videos
Filter Videos
